waste plastic recycling machine

Waste tyre&plastic recycling plant 1.Professional manufacture 2.ISO14001:2004 ,ISO9001:2008 and CE 3.Strict quality control

Features  of 5th generation:

 

 

1. Fully coverrd reactor: Reactor is completely coverrd by the outshell which helps to keep the heat more effective.

 

 

2. Exterior rotating gear:   Exterior rotating gear make the gear more durable in the process.

 

 

3. Autofeeder: 5th generation design is perfectly suitable for autofeeder which can transfer the waste materials into the reactor by hydraulic power.

The product getting from the machine are as follows:

1.Crude oil : 40%~ 45%( Because the oil production depends on the quality of the tyre and usually it's between 40%~45%)

2.Steel wire : 13%

3. Carbon black:37% (can be used to make briquette )

4. Waste water and steam:5%~10%

 

We have experiences in exporting to Jordan , USA , India , Brazil , Albania , Philippines , Dubai , Vietnam , South Korea , and Ghana and so on, and have a good reputation in pyrolysis equipment market.

 

We produce pyrolysis equipments which can handle5 tons , 6 tons and 10tons of waste tyres, plastics, and rubber and convert them to crude oil, carbon black and steel wire per batch.

 

 

Working process Of pyrolysis plant:

 

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460°C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

 

 

 

 

Working process Of pyrolysis plant:

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460°C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

 

 

waste plastic recycling machine